SPONSORED LINKS

1999 Ford Windstar starter will not engage

Tiny
FORDGIRL99
  • MEMBER
  • 1999 FORD WINDSTAR
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 10,800 MILES
I have a 1999 ford windstar van that has no signal at starter. We have replaced ignition switch, neutral saftey switch, all relays, and starter, and none of these were the answer. Why won't it start could it be the ecm module?
Sunday, February 1st, 2009 AT 8:00 PM

3 Replies

Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
Hello,

Does everything else seem to work?

Does the vehicle have a security system?

Do you know it you key has the security chip in it. If the key has a black rubber covering it possibly has a chip in it and it may have gone bad if you have a spare key try starting the vehicle with it?

.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, February 1st, 2009 AT 8:12 PM
Tiny
FORDGIRL99
  • MEMBER
  • 1 POST
Tried both keys doesn't work. Yes, but the dash lights don't yes it has factory security.
Was this
answer
helpful?
Yes
No
+1
Sunday, February 1st, 2009 AT 8:56 PM
Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
Ok, is the red security light flashing rapidly or on steady?

Is there anyway you could have the codes read. Try your local parts store and see if they rent scanners. Post codes here if can get them read.

.
Was this
answer
helpful?
Yes
No
+1
Sunday, February 1st, 2009 AT 9:21 PM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Not Cranking Over
GUIDE
Not Cranking Over
When your engine is not cranking (turning) over it will be mainly due to three separate areas, first it could be the battery, cables or poor connection, next is the starter...
VIEW MORE

Sponsored links