Engine starts, but it will not stay on. If I give it some gas it will run, but if let it go, it will stall. Truck does not idle.
It happened before, but after a few tries, it started and did not have problems through that day. Today is cold and it will not stay on after a lot of tries.
What could be the problem?
Mario
Saturday, March 8th, 2008 AT 3:22 PM
3 Replies
FLEXY5
MECHANIC
512 POSTS
Sounds like it needs an IAC valve. You can try to clean it, but I haven't had much success with that being a long term solution. It will eventually need to be replaced.
Was this
answer
helpful?
Yes
No
Saturday, March 8th, 2008 AT 5:18 PM
BLACKOP555
MECHANIC
10,386 POSTS
I have to agree with dave on this one but I have one more question.
Does it idle fine when the engine has warmed up?
Was this
answer
helpful?
Yes
No
Sunday, March 9th, 2008 AT 9:48 AM
SANMAR
MEMBER
1 POST
Don't know. When it happened before and it started, after a few tries, it ran good. I did not notice anything different.