1991 Ford LTD Crown Vic problems

Tiny
KAJIRA4MASTER
  • MEMBER
  • 1991 FORD CROWN VICTORIA
:( 150,231 miles on it
My biggest problem is that when I start the engine it will rev really high and then sputter and die. Also when after I warm it up it will sputter and die when I come to a stop.
do you think it could be the fuel filter or possible hole in one of the hoses? And does anyone know where the fuel filter is located apporx. For this car?
Thank you for your time!
Tuesday, January 9th, 2007 AT 12:21 PM

6 Replies

Tiny
TAURUSWHEEL
  • MECHANIC
  • 718 POSTS
Check engine light ever come on?
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 9th, 2007 AT 5:22 PM
Tiny
KAJIRA4MASTER
  • MEMBER
  • 4 POSTS
No it never came on at all. And it ran real good until about 4 days ago and then it started this. I have no idea what is wrong :(
Was this
answer
helpful?
Yes
No
Tuesday, January 9th, 2007 AT 6:12 PM
Tiny
AMITE
  • MEMBER
  • 1 POST
It located under the passenger side under the car my the rear right wheel.
Was this
answer
helpful?
Yes
No
Tuesday, January 9th, 2007 AT 6:30 PM
Tiny
KAJIRA4MASTER
  • MEMBER
  • 4 POSTS
Awsome thank you!
Was this
answer
helpful?
Yes
No
Tuesday, January 9th, 2007 AT 6:42 PM
Tiny
KAJIRA4MASTER
  • MEMBER
  • 4 POSTS
Ok replacing the fuel filter didn't work. Any other ideas?
Was this
answer
helpful?
Yes
No
Thursday, January 11th, 2007 AT 9:40 AM
Tiny
HYKNRD
  • MEMBER
  • 59 POSTS
Kajira4master---

Just one of the many possibilities---check for a vaccuum leak.
Check all hoses to make sure they're connected, tight, and in good shape.
With the engine running listen for a hissing type noise. May or may not lead you to the problem.
Was this
answer
helpful?
Yes
No
Thursday, January 11th, 2007 AT 4:41 PM

Please login or register to post a reply.

Sponsored links