2006 Chrysler Crossfire Little wrench icon in my mileage in

Tiny
VRWA1957
  • MEMBER
  • 2006 CHRYSLER CROSSFIRE
  • 6 CYL
  • 2WD
  • MANUAL
  • 7,000 MILES
Hello,
I recently purchased a 2006 Crossfire and noticed just about a week ago that when I start the engine, a little wrench icon appears in the mileage bar. What does that represent? Thank you.
Victoria
Do you
have the same problem?
Yes
No
Friday, October 3rd, 2008 AT 11:05 AM

1 Reply

Tiny
2CARPRO JACK
  • EXPERT
That is a service reminder. To reset do the following
In car, door shut
1-Turn key to "on/run" position
2-Within 1 second push button/knob to the left of the display twice
3-the present status for distance traveled or days remaining is displayed, within 10 seconds turn key to "off"
4-Press and hold the button/knob to the left of the display down while turning key to "on/run" position again, the present status for distance traveled or days remaining is displayed once more. Continue to hold the button down
5-Release the button/knob. After 10 seconds a tone sounds and 7000 should be displayed for approx 10 seconds
Was this
answer
helpful?
Yes
No
+4
Friday, October 3rd, 2008 AT 6:47 PM

Please login or register to post a reply.

Sponsored links