• Tiny
  • kris.nowicki2
  • 2005 Chrysler 300

Engine Cooling problem
2005 Chrysler 300 6 cyl Two Wheel Drive Automatic 138549 miles

how do you replace the thermostat housing on a 2.7

updated 2/15/10
not that one the one in back of the power steering pump with the water outlet tube?

Sunday, February 7th, 2010 AT 9:57 AM

1 Answer

  • Tiny
  • steg0687
  • Member

Let me guess you have coolant leaking around the bleeder on the t-stat housing. This is a pretty simple
fix. There are only a 3 or 4 bolts holding the housing
on but you cant get to all of them because the upper
intake is in the way. You can usually get to the hidden bolts if you just loosen all of the upper intake plenum bolts. Remove and replace the housing, dont forget the gasket/o-ring, bolt the upper intake manifold back down and your done. Just fill it up and bleed out all the air.

Was this
Thursday, February 11th, 2010 AT 5:16 PM

Please login or register to post a reply.

Similar Questions