where and how do I adjust belt tensioner so I can change the alternator?
Sep 23, 2008 at 6:07 AM
1996 Buick Skylark serpentine belt
1996 BUICK SKYLARK
MATTHEW 43
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Hi:
Your vehicle has an automatic belt tensioner. It should be located near the other pullies because the belt runs over it too. Usually required is a ratchet or box end wrench to work it. Once you get the wrench on the pulley, pull the tensioner loose to remove the belt and the reverse to replace it. The vehicle should have a routing diagram for the belt. If you can't find it, let me know and I'll get you a diagram of it.
Joe
Your vehicle has an automatic belt tensioner. It should be located near the other pullies because the belt runs over it too. Usually required is a ratchet or box end wrench to work it. Once you get the wrench on the pulley, pull the tensioner loose to remove the belt and the reverse to replace it. The vehicle should have a routing diagram for the belt. If you can't find it, let me know and I'll get you a diagram of it.
Joe
Oct 2, 2008 at 7:50 PM