2013 Chrysler Sebring no start

2013 CHRYSLER SEBRING
2.7L • V6 • FWD • AUTOMATIC
Avatar
BBLIND
  • MEMBER
  • 3 POSTS
Replaced engine and will not start. No spark or injector pulse. Checked fuel pressure (60 psi). Replaced crank and cam sensor- still cranks over but no start. Have power to coils (12v) while cranking but no spark. Replaced PCM and still no start. What next? Any help will be great.
Oct 12, 2015 at 6:22 PM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
if you had the old pcm you could reset the security system and probably go but since you replaced the pcm a local pro now has to program the security into the system or it will never start. regardless of what parts people tell you security always has to be programmed into a new/rebuilt pcm. next time try resetting security system first.
Oct 13, 2015 at 6:08 AM
Avatar
BBLIND
  • MEMBER
  • 3 POSTS
Thank you. I was wondering about something along those lines, Sorry but I fat fingered my entry the vehicle is a 2003 and not a 2013. Is the same prognoses the same? Thanks again for your time,
Oct 13, 2015 at 3:25 PM
Advertisement
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
yes its' the same
Oct 13, 2015 at 4:48 PM