2010 FORD EXPLORER ERROR CODE P0191

  • Tiny
  • ghazitm
  • 2010 Ford Explorer
  • 4.0L
  • V6
  • 4WD
  • automatic
  • 69,000 miles

I faced a problem that my Explorer RPM fluctuating and the car stop moving while the engine still running I checked with my ACTRON code reader and it showed code P0191 (Fuel Rail Pressure sensor A circuit Range/Performance)
Where could be the problem? Is it the sensor? Or it might be the fuel pump?

Do you
have the same problem?
Yes
No
Saturday, April 12th, 2014 AT 9:38 PM

2 Replies

  • Tiny
  • hmac300
  • Expert
  • 43,646 posts

Check fuel pressure with a gauge first auto parts rent it and clean throttle plate on both sides an diac hole with choke cleaner. Shold be 30-40 psi key on engine off

Was this
answer
helpful?
Yes
No
Sunday, April 13th, 2014 AT 8:41 AM
  • Tiny
  • ghazitm
  • Member

The fuel pressure is OK.
But I found that when I leave tha car running for long time fuel pump start giving abnormal sound.
I changed the fuel pump and filter, now my car performing greatly.
Thank you for your advice.

Was this
answer
helpful?
Yes
No
Friday, April 18th, 2014 AT 8:04 AM

Please login or register to post a reply.

Similar Questions