Rotor removel

2009 PROTON
990,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
ROSS
  • MEMBER
  • 1 POST
Proton Jumbuck Utility. Does the centre wheel bearing nut need to be removed to change the disc rotors or should they just come away. If it has to be removed are both sides right hand thread.
Apr 19, 2011 at 12:32 AM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
KHLOW2008
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 41,814 POSTS
After removal of the brake caliper mount, the rotors should come off. Give the center of the rotor some banging with a hammer and they should come off.
If they do not, between the lug nuts you should see 2 holes which you can use 2 pieces of m8 bolts to slowly and evenly turn in to dislodge the rotor.
Apr 19, 2011 at 9:00 PM