ROTOR REMOVEL

  • Tiny
  • Ross
  • 2009 Proton
  • 4 CYL
  • 2WD
  • manual
  • 990,000 miles

Proton Jumbuck Utility. Does the centre wheel bearing nut need to be removed to change the disc rotors or should they just come away. If it has to be removed are both sides right hand thread.

Do you
have the same problem?
Yes
No
Tuesday, April 19th, 2011 AT 12:32 AM

1 Reply

  • Tiny
  • KHLow2008
  • Expert
  • 41,997 posts

After removal of the brake caliper mount, the rotors should come off. Give the center of the rotor some banging with a hammer and they should come off.
If they do not, between the lug nuts you should see 2 holes which you can use 2 pieces of m8 bolts to slowly and evenly turn in to dislodge the rotor.

Was this
answer
helpful?
Yes
No
Tuesday, April 19th, 2011 AT 9:00 PM

Please login or register to post a reply.

Similar Questions