How can I fix a code P0741 and a P0700?

Tiny
FHEIDE6@RESL.MTS.NET
  • MEMBER
  • 2008 DODGE CALIBER
  • 34,000 MILES
My car bucks or engages harsh when I shift the auto stick into reverse or drive.I performed an OBD2 scan on it and retrieved codes p0741(freeze frame), p0700, pending p0741 and pending p0700.I cannot afford to pay a shop for repairs at this time.
Do you
have the same problem?
Yes
No
Saturday, June 2nd, 2012 AT 3:07 PM

6 Replies

Tiny
FIXITMR
  • EXPERT
Is fluid level correct?
Was this
answer
helpful?
Yes
No
Saturday, June 2nd, 2012 AT 4:34 PM
Tiny
FIXITMR
  • EXPERT
Sounds like TC circuit is malfunctioning or TC itself has a problem.
Was this
answer
helpful?
Yes
No
Saturday, June 2nd, 2012 AT 5:07 PM
Tiny
FHEIDE6@RESL.MTS.NET
  • MEMBER
I had the cvt fluid checked by a local Dodge dealership and reported to at the proper level.
Was this
answer
helpful?
Yes
No
-1
Sunday, June 3rd, 2012 AT 5:03 PM
Tiny
FHEIDE6@RESL.MTS.NET
  • MEMBER
I have had a local Dodge dealership check the cvt fluid level and it is at a proper level.
Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 5:08 PM
Tiny
ASEMASTER6371
  • EXPERT
Did they identify the problem?

Roy
Was this
answer
helpful?
Yes
No
Sunday, June 3rd, 2012 AT 8:32 PM
Tiny
FHEIDE6@RESL.MTS.NET
  • MEMBER
They told me it might be the transmission. They removed the cvt oil pan to check for metal filings but no significant amount had been noted. They told me that it might be the transmission control module.I replaced the battery and noticed that the neutral safety switch has been marked with a yellow line. Does the transmission control module need to be reprogrammed?
Was this
answer
helpful?
Yes
No
Monday, June 4th, 2012 AT 6:23 PM

Please login or register to post a reply.

Sponsored links