I have a vibration in my steering wheel when braking

2008 CHRYSLER TOWN AND COUNTRY
49,000 MILES
Avatar
GHUDDLESTON
  • MEMBER
  • 1 POST
I have changed all the brakes and rotors and put on new tires I have put on new brakes and rotors and new tires and still have a vibration in the steering wheel when braking what else could it be?
Feb 7, 2012 at 4:22 AM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
Has the vibration changed at all since the work was done? Have you checked all steering components and alignment, ball joints will cause this, also the tires, try to rotate them front to rear.?
Feb 7, 2012 at 4:33 AM
Avatar
CADIEMAN
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 3,544 POSTS
new rotors need to put on the lath and take 1/1000 of to true the rotor or they will pulsate a little while after the repair.this also resurfaces the rotor so the pads can seat properly after the repair and the brakes stop much better when the pads get fully seated to the rotor.ty for using 2carpros
Feb 7, 2012 at 6:47 AM
Advertisement