DEFENDER 2007

  • Tiny
  • alimotors
  • 2007 Land Rover Defender
  • 4 CYL
  • 4WD
  • manual
  • 65,000 miles

I installed clutch disc n plate on a defender 2007 now the clutch doesn't work, the pedal is normal but when u start the car example it on on 1st gear and u depress the clutch the car just moves like the clutch isn't there, but the pedal seems to be normal, what could cause this? Really need your help please. Thanks

Sunday, June 26th, 2011 AT 1:57 AM

4 Answers

  • Tiny
  • rasmataz
  • Member

Check the clutch slave if its engaging

Was this
answer
helpful?
Yes
No
Sunday, June 26th, 2011 AT 2:19 AM
  • Tiny
  • alimotors
  • Member

It is, I think the clutch disc might be backwards, I just read "how to install a disc n plate" and it says if it's backwards it will cause the the gear to not disengage although I am quite sure it's fitted correctly I will have to take it out again to make sure. If u have any other tips I will be grateful. Thanks.

Was this
answer
helpful?
Yes
No
Sunday, June 26th, 2011 AT 2:31 AM
  • Tiny
  • rasmataz
  • Member

Installing it backwards will do that-

Was this
answer
helpful?
Yes
No
Sunday, June 26th, 2011 AT 2:36 AM
  • Tiny
  • alimotors
  • Member

Thanks, it's almost 4 am here and I have searching for answers all night, anyways thanks a lot, I will let u know how it goes.

Was this
answer
helpful?
Yes
No
Sunday, June 26th, 2011 AT 2:40 AM

Please login or register to post a reply.

Similar Questions