2007 Chrysler Town and Country ABS

Tiny
BBMCAFEE111
  • MEMBER
  • 2007 CHRYSLER TOWN AND COUNTRY
  • 3.3L
  • 6 CYL
  • AUTOMATIC
  • 10,007 MILES
ABS light on, there is a motor running after van is off. Removed X2 ABS fuses (system-25A and pump 40A or vies verso and then van would not start at all. When 25A was removed motor sound continued. The only way to stop motor from running to disconnect the battery. Any suggestions since I canSPONSORED LINKS
Do you
have the same problem?
Yes
No
Monday, June 15th, 2015 AT 3:04 PM

1 Reply

Tiny
HMAC300
  • EXPERT
You'll have to have it scanned for codes as the abs unit is bad more than likely. They can be rebuilt. Fuses 9 & 21 go to abs module and may shut it off. Fuse 9 is for the pump/motor pulling both of those may shut it off without having to disconnect battery. There is another fuse that goes to ignition and don't think that will effect. Just make sure your brakes work which they should prior to driving. YOu will not have any abs.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 15th, 2021 AT 12:56 PM

Please login or register to post a reply.

Related ABS Pump Motor Content

VIEW MORE

Sponsored links