SPONSORED LINKS

2006 Nissan Tiida install temp guage

Tiny
CALBEC
  • MEMBER
  • 2006 NISSAN TIIDA
  • 1.5L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 65,000 MILES
I want to install an after market water temp gauge tapping into the water hose but I am not sure which water hose top or bottom to cut & install the pipe for the sender I would like some advice on this please
Sunday, April 19th, 2015 AT 9:40 AM

4 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If the temp gauge is electric it will need aground wire if installing in a hose. The top radiator hose will be ok but temp gauge will read a little hotter than temp actually is.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, April 19th, 2015 AT 12:25 PM
Tiny
CALBEC
  • MEMBER
  • 3 POSTS
Thanks for the reply I actually went ahead & cut the bottom hose is it ok to use the bottom hose
For the ground does the wire have to go directly to the pipe or attach to the sender
Was this
answer
helpful?
Yes
No
Sunday, April 19th, 2015 AT 3:55 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Bottom hose is ok ground wire attachs to sender
Was this
answer
helpful?
Yes
No
Sunday, April 19th, 2015 AT 4:33 PM
Tiny
CALBEC
  • MEMBER
  • 3 POSTS
Hi thanks will continue and see how it works
Was this
answer
helpful?
Yes
No
Sunday, April 19th, 2015 AT 5:08 PM

Please login or register to post a reply.

Sponsored links