SPONSORED LINKS

2006 Dodge Ram Engine Codes PO932,732,868/869, 733, 734, P1790

Tiny
MEGANPOTTER
  • MEMBER
  • 2006 DODGE RAM
  • 123,000 MILES
Truck will drive in correct gear for 1st and 2nd, shift to 3rd-computer does not register 3rd gear so 4500rpm @ 35mph. Dropped pan, changed filter, new fluid, I had "wicking" up on the computer module on the bulkhead, cleaned off, reset TCM, all the same codes popped back up. What is the next step before I replace transmission?
SPONSORED LINKS
Friday, October 4th, 2013 AT 8:31 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Have a trans guy scan it to see what the code is it may be in limp mode or a valve body problem.
Was this
answer
helpful?
Yes
No
-1
Friday, October 4th, 2013 AT 9:57 AM
Tiny
MECHTRIX
  • MECHANIC
  • 48 POSTS
Yep. Sounds like the valve body to me too. Maybe a valve body gasket leak
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 6th, 2016 AT 7:55 PM

Please login or register to post a reply.

Related P0932 Content

Sponsored links