SPONSORED LINKS

Problems with the shifter

Tiny
MAUSER_MITCH
  • MEMBER
  • 2005 NISSAN MURANO
  • 65,000 MILES
When you look from the interior of the vehicle and see the shifter assembly, and try to shift into any gear it seems to bind up and not want to shift. When I looked at it a little closer without tearing it all apart, I noticed that there is a belt there that the shifter slides on up by the prnd plate. When you try to shift it looks like the belt is binding up and causing shifting issues, as well as raising that plastic plate up. Is there any way to replace that without needing to go to the dealership?
SPONSORED LINKS
Monday, August 6th, 2012 AT 3:04 PM

4 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you can point out what you are talking about then it would be easier or let us know by number. But this may need a shifter and that may only be available at the dealer.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 3:20 PM
Tiny
MAUSER_MITCH
  • MEMBER
  • 3 POSTS
I will look tonight and post a pic.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 3:28 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ok if you can use the chart that would be better but ok
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 3:29 PM
Tiny
MAUSER_MITCH
  • MEMBER
  • 3 POSTS
It looks like its in the A/T Console Finisher.
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 3:35 PM

Please login or register to post a reply.

Related Transmission Gear Selector Replace/Remove Content

Sponsored links