Trouble code for EGR valve

Tiny
TOMMYGO
  • MEMBER
  • 2005 DODGE RAM
  • V8
  • 2WD
  • AUTOMATIC
  • 72,000 MILES
Still getting a code for a bad EGR valve on a 2005 dodge ram 1500 after changing the valve but check engine light now goes out
Do you
have the same problem?
Yes
No
Friday, July 22nd, 2011 AT 6:03 PM

6 Replies

Tiny
DOCFIXIT
  • EXPERT
So what's the question?
Was this
answer
helpful?
Yes
No
-1
Friday, July 22nd, 2011 AT 6:18 PM
Tiny
TOMMYGO
  • MEMBER
How do I clear the code so it will stay cleared? The code is still there when the emmission system is checked by a garage
Was this
answer
helpful?
Yes
No
Friday, July 22nd, 2011 AT 6:54 PM
Tiny
DOCFIXIT
  • EXPERT
Suspect EGR didnot need replaced codes indicate a fault in system not a specific part so post code and will advise
Was this
answer
helpful?
Yes
No
Friday, July 22nd, 2011 AT 6:58 PM
Tiny
TOMMYGO
  • MEMBER
Code is P0406
Was this
answer
helpful?
Yes
No
Friday, July 22nd, 2011 AT 11:30 PM
Tiny
DOCFIXIT
  • EXPERT
Don't supose you have a scan tool so testing going to be long and detailed. To start see diagram connector to EGR Position Sensor at pin 27 check for voltage key on post from there go to next step
Was this
answer
helpful?
Yes
No
Saturday, July 23rd, 2011 AT 5:42 PM
Tiny
DOCFIXIT
  • EXPERT
Forgot diagram
Was this
answer
helpful?
Yes
No
Saturday, July 23rd, 2011 AT 7:37 PM

Please login or register to post a reply.

Sponsored links