HOW TO REPLACE WINDOW REGULATOR IN TOWN & COUNTRY

2005 Chrysler Town and Country

Tiny

oneilkb

February, 20, 2012 AT 3:11 PM

I need to know how to remove the door panel.

FOUND 300 RELATED QUESTIONS

2 Answers

Tiny

BMRFIXIT

February, 20, 2012 AT 3:28 PM

Remove the plug and remove screw attaching door pull cup to inner door panel.
Remove switch bezel and disconnect power window/memory switch.
Remove screws attaching trim panel to door from below map pocket.
Remove screw holding door trim to door panel from behind inside latch release handle.
Disengage clips attaching door trim to door frame around perimeter of panel.
Lift trim panel upward to disengage flange from inner belt molding at top of door.
Tilt top of trim panel away from door to gain access to latch linkage.
Disengage clip attaching linkage rod to inside latch release handle.
Separate linkage rod from latch handle.
Disconnect the power door switch, courtesy lamp electrical connectors.
Remove front door trim panel from vehicle

Tiny

oneilkb

February, 20, 2012 AT 3:35 PM

THANK YOU very much. We will give it a try!

Please login or register to post a reply.

Window Regulator and Motor Replacement Honda
Window Switch Replacement and Test
Dynamat Door Installation