2005 Chrysler Sebring oil light flashing

Tiny
JOE1953
  • MEMBER
  • 2005 CHRYSLER SEBRING
  • 145,000 MILES
What cause oil light to flash when engine is idling on a 2005 Chrysler Sebring 4cyl the light don't flashing when driving, the man that own the car had a Timing Belt and oil pump replace at 145,000 miles because he didn't want the belt to break, the oil light start flashing after the the belt and oil pump was replace, the engine don't make a knocking sound, the man want to sell the car for $1500, what could be the cause?
Do you
have the same problem?
Yes
No
Friday, August 9th, 2013 AT 11:17 AM

3 Replies

Tiny
CARADIODOC
  • EXPERT
Have your mechanic perform a mechanical oil pressure test to see what you really have. If it's low, suspect the crankshaft and connecting rod bearings. If the pressure is good, check for a wire from the oil pressure sending unit that's grounded somewhere.
Was this
answer
helpful?
Yes
No
+1
Friday, August 9th, 2013 AT 11:47 AM
Tiny
JOE1953
  • MEMBER
Where is the oil pressure switch located on the 2005 chrysler sebring four cylinder I believe I can check the oil pressure?
Was this
answer
helpful?
Yes
No
Friday, August 9th, 2013 AT 5:40 PM
Tiny
CARADIODOC
  • EXPERT
It depends on which engine you have but it's always next to the oil filter or attached to the filter housing.
Was this
answer
helpful?
Yes
No
Friday, August 9th, 2013 AT 7:37 PM

Please login or register to post a reply.

Sponsored links