Left Front Knuckle Replacement?

Tiny
KLONKEY
  • MEMBER
  • 2004 HYUNDAI SANTA FE
  • 2.7L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 145,000 MILES
I have a bad wheel bearing for my vehicle. Instead of dealing with the need for a press (which I don't have), I bought the entire front left knuckle. Are there any repair guides that can walk me through the removal or anything that I need to know before I do this? I'm normally okay at figuring things out, or finding stuff on YouTube, but this is not something I have been able to find.
Thursday, May 25th, 2023 AT 11:55 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 110,114 POSTS
Hi,

The directions I have are for replacing the bearing. However, that requires the removal and replacement of the steering knuckle.

Take a look through the directions and let me know if you have questions.

Take care,

Joe

See pics below. Note: Pic 1 provides the torque specs for each part. Make sure to torque the axle nut to spec before putting weight on it.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Was this
answer
helpful?
Yes
No
Thursday, May 25th, 2023 AT 8:56 PM

Please login or register to post a reply.

Related Wheel Bearing Replace/Remove Content

Wheel Bearing Replacement
VIDEO
Wheel Bearing Replacement
In­struc­tional re­pair video
CV Axle Bearing Press
GUIDE
CV Axle Bearing Press
This guide will show you how to use a hy­draulic press to in­stall an axle bear­ing into a spin­dle which holds a CV axle on ei­ther the front or rear of your ve­hi­cle. We are a...
VIEW MORE