Hi I have a Range rover vouge 2004 my problem hard power steering after short time from engine start.

2004 ROVER RANGE ROVER
160,000 MILES
Avatar
YOUSSEF1ST
  • MEMBER
  • 4 POSTS
When start smooth power steering for very short time.
I changed the pump but the same
Thanks for help
Jun 13, 2012 at 7:43 AM
Advertisement
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
check your rack to see if it's leaking, it may be leaking internally causing your problem.
Jun 13, 2012 at 2:11 PM
Avatar
YOUSSEF1ST
  • MEMBER
  • 4 POSTS
Hi, Thanks for the reply, sure no leaks, some one asked me to replace the Body control Module I did (with a used BCM),the steering is O.K. Now, but the power windows are not functioning properly.
Do I need to do any programing for the BCM????
Thanks.
Jun 16, 2012 at 11:50 AM
Advertisement
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
yes you will
Jun 16, 2012 at 12:19 PM
Avatar
YOUSSEF1ST
  • MEMBER
  • 4 POSTS
Hi, I have an Autoboss star diag Scan tool, will I be able to program the used BCM with it, and what are the steps?
Thanks
Jun 16, 2012 at 12:53 PM
Advertisement
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
if it is apro model you should be able to do that but i don't want to tell you how to do it because you could make it worse than itis.
Jun 16, 2012 at 6:05 PM