replace air filter in 2004 pacifica
Dec 30, 2010 at 7:47 PM
how to replace the air filter
2004 CHRYSLER PACIFICA
DRN360
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
REMOVAL
Disconnect the intake air temperature sensor (IAT) wiring harness connector.
Disconnect the air inlet tube at the throttle body.
Remove the cover screws
Lift cover and pull toward the engine and remove cover tabs from air box.
Lift cover and remove the element (Fig. 16).
Disconnect the intake air temperature sensor (IAT) wiring harness connector.
Disconnect the air inlet tube at the throttle body.
Remove the cover screws
Lift cover and pull toward the engine and remove cover tabs from air box.
Lift cover and remove the element (Fig. 16).
Image (Click to enlarge)
Dec 30, 2010 at 9:42 PM