I have a 350Z manual and one day my car lost a lot power could it be the clutch

Tiny
NISSAN350Z
  • MEMBER
  • 2003 NISSAN 350Z
  • 100,000 MILES
My car lost power I get no acceleration in any gear I even put car in any gear and let go of the cluych and it wont shut off
Do you
have the same problem?
Yes
No
Thursday, December 29th, 2011 AT 1:18 AM

6 Replies

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Yep. Clutch problem.
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 1:19 AM
Tiny
NISSAN350Z
  • MEMBER
  • 4 POSTS
Yea thank you I even been smelling something weird outside probably clutch goin bad
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 1:21 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Try adjusting it first, if possible. Then go with replacement.
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 1:24 AM
Tiny
NISSAN350Z
  • MEMBER
  • 4 POSTS
In order to adjust it how that works
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 1:27 AM
Tiny
NISSAN350Z
  • MEMBER
  • 4 POSTS
In order to adjust it how that works never done it before
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 1:28 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Your clutch is hydraulic, so the only adjustment is the length of the push rod between the slave cylinder and clutch fork. You would need to shorten that rod so that it allows more pressure to be applied to the clutch disc. My guess is that with your description of the problem, you won't be able to adjust enough, though. But, it's worth a try and may give you some time to save for the expense of the repair.
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 4:10 AM

Please login or register to post a reply.

Sponsored links