2003 Nissan 350Z Code P1212 P1610 P1612 U1001

Tiny
HARRYLIM888
  • MEMBER
  • 2003 NISSAN 350Z
  • 3.5L
  • V6
  • RWD
  • MANUAL
  • 66,000 MILES
Crank but wont start
Headlight stays on
Radiator Fan stays on
Aircon Fan stays on
Tcs off
Slip on
Abs on
Brake on
Do you
have the same problem?
Yes
No
Saturday, April 18th, 2015 AT 12:41 AM

10 Replies

Tiny
HMAC300
  • EXPERT
Because you have the U1001 code this may set all the others. What has happened is ecm cannot communicate with other modules. The can network is either shorted or open and a pro must look at this. Then if there are remaining codes those have to be looked at after clearing codes and seeing if they come back.
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2015 AT 6:29 AM
Tiny
HARRYLIM888
  • MEMBER
Do I need to replace some parts? Or check the harness and clear the codes?
Was this
answer
helpful?
Yes
No
-2
Saturday, April 18th, 2015 AT 6:33 AM
Tiny
HMAC300
  • EXPERT
You have to check harness for a short or an open-Broken then clear codes and see what if any come up
Was this
answer
helpful?
Yes
No
-1
Saturday, April 18th, 2015 AT 6:59 AM
Tiny
HARRYLIM888
  • MEMBER
Thanks. This all started when I shipped my car to a ferry boat.
Was this
answer
helpful?
Yes
No
Saturday, April 18th, 2015 AT 7:04 AM
Tiny
HARRYLIM888
  • MEMBER
We checked already all the harness and We diDnt find any shortage or open. Is it possible the BCM is busted?
Was this
answer
helpful?
Yes
No
Tuesday, April 21st, 2015 AT 4:03 AM
Tiny
HMAC300
  • EXPERT
I kind of doubt it a pro has to check this as he can use a scanner to help him find the problem there are about 19 modules that are connected to the same line and one of these can be screwing up or wiring going to one can cause the problem. The ecm isn't talking ot he other modules is why the code is set.
Was this
answer
helpful?
Yes
No
Tuesday, April 21st, 2015 AT 5:30 AM
Tiny
HARRYLIM888
  • MEMBER
We did scan already. And the problem is CAN COm Circuit. The ignition switch is off.
Was this
answer
helpful?
Yes
No
-1
Tuesday, April 21st, 2015 AT 5:45 AM
Tiny
HMAC300
  • EXPERT
So if you know the code start looking I can't fix it for you see pics for diagnostics.
Was this
answer
helpful?
Yes
No
Tuesday, April 21st, 2015 AT 6:13 AM
Tiny
HARRYLIM888
  • MEMBER
Hi. The Car is In the dealer shop right now. And they can't detect the problem. Its still in LOCK mode(P1610) and IPDM failsafe mode (U1001). I told them to reprogram the NATS Key.
Was this
answer
helpful?
Yes
No
Friday, April 24th, 2015 AT 2:00 AM
Tiny
JASON 03 350Z
  • MEMBER
Hi harrylim888, did you ever get the problem resolved? I am having the same problem, I found some corrosion on the connectors 48 and 49 on my IPDM and was told it can creep up the connector and eat through the wire, I have been hesitant to strip the wire because I dont have those connectors. If this was your problem let me know please.
Was this
answer
helpful?
Yes
No
-1
Saturday, January 30th, 2016 AT 3:54 PM

Please login or register to post a reply.

Recommended Guides