SPONSORED LINKS

2003 Hyundai Santa Fe purge control valve

Tiny
ED OHMNES
  • MEMBER
  • 2003 HYUNDAI SANTA FE
  • 150,000 MILES
Car won't start, i've replaced crank sensor, cam sensor, timing belt, the car still won't start it runs good for a day or 2 then next morning it starts for 30 sec. Then dies , that's it won't start i've bought a purge control valve, but I can't find where it is on the car, it's a 2003 santa fe. With 2.4 litre. Nd a standard. Can you help me. I'm trying to fix it today so I don't miss work anymore.
SPONSORED LINKS
Sunday, September 1st, 2013 AT 12:59 PM

8 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Scan for codesand check fuel pressure with a gauge first
Was this
answer
helpful?
Yes
No
Sunday, September 1st, 2013 AT 1:09 PM
Tiny
ED OHMNES
  • MEMBER
  • 5 POSTS
I had no check engine light on this time so this is what I came up with, purge control valve. But I can't find it on the 2.4 on the internet. Location of valve?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 1st, 2013 AT 2:40 PM
Tiny
ED OHMNES
  • MEMBER
  • 5 POSTS
I would like to try this valve as it seems to be a common problem on this vehicle. I've replaced all the main sensors already and timing belt
Was this
answer
helpful?
Yes
No
+1
Sunday, September 1st, 2013 AT 2:42 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Apurge valve shouldn't stop your vehicle from running, maybe not idle good but not run. If you don't do the basic thing's I've said then you can change all the sensors and stillnot start. It could be either a crank or cam sensor as well as they wont' set a code all thetime you have to check resistance which I have no figures for so check against new. Here's your diagram for valve
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Sunday, September 1st, 2013 AT 3:17 PM
Tiny
ED OHMNES
  • MEMBER
  • 5 POSTS
The crank and the cam sensors have been replaced along with the timing belt. And it still ran for 2 dAYS then I started it in the morning and it ran for 20 seconds roughly and quit and it wouldn't start again. I've been trying to get it fixed for 2 weeks now.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 1st, 2013 AT 4:05 PM
Tiny
MAXIMILIAM
  • ADMIN
  • 436 POSTS
Hi,

the print you sent me comes up as a black screen. I guess i'm just not
going to get this fixed today. Seems to be impossible to find out where the
purge valve is on a 2.4 Santa Fe 2003 Oh but the roughriders won, so all
was not lost ha thanks anyways.
Was this
answer
helpful?
Yes
No
Sunday, September 1st, 2013 AT 11:26 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you look at the diagram I sent it's item 1 in the pic
Was this
answer
helpful?
Yes
No
Monday, September 2nd, 2013 AT 5:56 AM
Tiny
MAXIMILIAM
  • ADMIN
  • 436 POSTS
Thanks anyways, I can't see the diagram, it's too small. And when I click
on it it goes black anyways, I gave up I have no time left, towed it back
to the shop. Hopefully they can fix it this time, thanks for all your help
300, I appreciate it.
Was this
answer
helpful?
Yes
No
-1
Tuesday, September 3rd, 2013 AT 12:01 AM

Please login or register to post a reply.

Related EVAP Purge Solenoid Content

VIEW MORE

Sponsored links