SPONSORED LINKS

The van stalled and when I turned the key to the.

Tiny
ANONYMOUS
  • MEMBER
  • 2003 DODGE CARAVAN
  • 220,000 MILES
The van stalled and when I turned the key to the start position nothing happens. Let it sit for a little while and it will start but only runs for about 30 seconds and then stalls again. Replaced the crankshaft position sensor and that did not solve the problem
SPONSORED LINKS
Monday, November 26th, 2012 AT 10:28 PM

2 Replies

Tiny
DRCRANKNWRENCH1
  • MECHANIC
  • 3,435 POSTS
Have the fuel pressure checked.
Was this
answer
helpful?
Yes
No
Monday, November 26th, 2012 AT 10:30 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,727 POSTS
If the starter doesn't even crank the engine there's no need to be looking at the crankshaft position sensor. Look at the battery cables, especially where the smaller positive one bolts to the under-hood fuse box, and the smaller negative one bolts to the body. If there's a large fuse bolted to the fuse box, be sure those nuts are tight.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 26th, 2012 AT 10:35 PM

Please login or register to post a reply.

Related Crankshaft Sensor Replace/Remove Content

Crankshaft Sensor Symptoms
GUIDE
Crankshaft Sensor Symptoms
Most modern car engines use a crankshaft sensor to monitor the engines crankshaft rotation. This sensor sends feedback information to the cars computer which then adjusts...
VIEW MORE

Sponsored links