A.I.S. Replacement

Tiny
BODYBODY
  • MEMBER
  • 2002 KIA SEDONA
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 170,000 MILES
You said one way to test the a.I.S. Is to remove it. Then turn the ignition on But leave the wires connected. But not to start the motor. Movement should be seen. However, what I want to know is how much movement should there be. Also would this vary a little from one system to another. The vehicle is a 2002 sedona ex. There is a chance the replacement one may not be good. Idle is either high. Above 1700, and or flunctuates for a bit then settles high. This happens every time it is used. It is also a used vehicle.
Saturday, February 5th, 2011 AT 1:13 AM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Is the Check Engine Light indicating?

Amount of movement is dependent on the engine temperature.
If replacement s a used unit, I would not discount the possibility of it being faulty as well.

Is condition before and after replacement identical or are there any difference?
Was this
answer
helpful?
Yes
No
Wednesday, February 9th, 2011 AT 3:17 PM

Please login or register to post a reply.

Related Engine Idle High Content

VIEW MORE