I need to replace my engine in my car so ive.

Tiny
ANONYMOUS
  • MEMBER
  • 2002 FORD FUSION
  • 92 MILES
I need to replace my engine in my car so ive brought an engine same year and cc and model to fit from ford spares essex highly recommend. Been told just drop it in start it up and it will go, no recoding to be done. But now been told diesel pump will need swapping and ecu needs recoding by one garage yet another says it dont even ford spares where engine is from says no need to HELP please.
Saturday, March 9th, 2013 AT 10:21 PM

4 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
I believe that you should be able to drop the engine in and run with no problem, if it was the same engine as you mention, there should be no problems.
Was this
answer
helpful?
Yes
No
Saturday, March 9th, 2013 AT 10:24 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Call ford for an explanation as they sold this unit to you. Have them contact the shop for updates

Roy
Was this
answer
helpful?
Yes
No
Saturday, March 9th, 2013 AT 10:24 PM
Tiny
JAYDEAN
  • MEMBER
  • 17 POSTS
So I wont have to change diesel pump or recode thanks
Was this
answer
helpful?
Yes
No
Sunday, March 10th, 2013 AT 10:12 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
I did not say that at all. You need to verify what has to be done from the manufacturer.

Roy
Was this
answer
helpful?
Yes
No
Sunday, March 10th, 2013 AT 11:52 AM

Please login or register to post a reply.

Sponsored links