How do you get the nut in front of the water.

Tiny
ANONYMOUS
  • 2002 FORD F-350
  • 150 MILES

How do you get the nut in front of the water pump pulley loose when trying to change out water pump pulley keeps spinning how do I stop it in order to get this large nut to break loose to take fan out of the way

Wednesday, November 28th, 2012 AT 3:00 AM

1 Reply

Tiny
CJ MEDEVAC
  • EXPERT
  • 9,705 POSTS

IT TAKES A "HOLDER TOOL" AND A "BIG OLE (USUALLY LONG) WRENCH"

MANY POPULAR AUTO PARTS STORES SORTA LET YOU BORROW THEM FOR FREE---BUT YOU MUST PUT UP A DEPOSIT (USUALLY THE COST OF THE TOOL) THEY RETURN YOUR $$$ WHEN YOU RETURN THE TOOLS! THEY DO THIS WITH LOTS OF "ONE TIME NEEDED TOOLS".............THIS IS HOW IT'S DONE IN S.C. ANYWAY

LIKE THIS SET IN THE LINK---USES A RATCHET HANDLE IN THE HOLDER TOOL

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_ford-fan-clutch-wrench-set-kd-tools_22981208-p?searchTerm=fan+wrenches

I THINK THE "HOLDER" ACTUALLY BACK-HOLDS THE HEADS OF 4 BOLTS AT THE SAME TIMEWHILE YOU USE THE WRENCH ON THE FAN

LET ME KNOW HOW IT GOES

THE MEDIC

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Wednesday, November 28th, 2012 AT 3:17 AM

Please login or register to post a reply.

Help us by donating