Car has a 3 liter V6 and cylinders 1, 3, and 4.

Tiny
TRISH28
  • 2002 CHRYSLER 300

Car has a 3 liter v6 and cylinders 1, 3, and 4 are misfiring. Codes are p0351, p0353, and p0354. I've checked the voltage repaired the wiring to the (COP) which all now have 12 volts, but all 3 cylinders still misfire. Vehicle has a new PCM was installed before I acquired the vehicle. I've also swapped out each of the (COPs) on all 3 cylinders with other (COPs) and its still misfiring. Im out of options and scratching my head. Can anyone advise something new to try?

Do you
have the same problem?
Yes
No
Wednesday, March 20th, 2013 AT 11:12 PM

4 Replies

Tiny
ASEMASTER6371
  • EXPERT
  • 25,554 POSTS

What wiring did you repair?

What about the plugs?

Roy

Was this
answer
helpful?
Yes
No
Wednesday, March 20th, 2013 AT 11:16 PM
Tiny
TRISHMILCHLING
  • MEMBER

I replaced the two splits that power the (COPs) The plugs appear to be fine but I plan to change them out. I tested at the end of the plugs.

Was this
answer
helpful?
Yes
No
Wednesday, March 20th, 2013 AT 11:21 PM
Tiny
ASEMASTER6371
  • EXPERT
  • 25,554 POSTS

How many miles on the plugs?

The codes indicate missfire in first 1000 rpm at start up. Could just be bad plugs

Roy

Was this
answer
helpful?
Yes
No
Wednesday, March 20th, 2013 AT 11:29 PM
Tiny
TRISH28
  • MEMBER

Well I know the 351-356 codes are ignition coil primary/secondary circuit malfunction. Im not sure on exact mileage but its not spark plug issues.

Was this
answer
helpful?
Yes
No
Wednesday, March 20th, 2013 AT 11:36 PM

Please login or register to post a reply.

Other Engine Computer PCM Replace/Remove Questions