Immobilizer fault

Tiny
LILLEDANNE
  • MEMBER
  • 2001 PEUGEOT 406
  • 2.2L
  • 4 CYL
  • FWD
  • MANUAL
After I have had the battery disconnected. This message came up in the display. Engine immobilizer fault. Is there any way to reset the immobilizer on this car (Peugeot 406 2, 2 sport -01) Or do I need to go to a Peugeot workshop?
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Sunday, May 25th, 2014 AT 10:28 AM

4 Replies

Tiny
HMAC300
  • EXPERT
Hello,

I would do a security system hard reboot here is a guide to help you.

https://www.2carpros.com/articles/how-to-reset-a-security-system

Please run down this guide and report back.

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Sunday, May 25th, 2014 AT 12:38 PM
Tiny
BOOPERIII
  • MEMBER
Thank you for this post the guide worked great!
Was this
answer
helpful?
Yes
No
Tuesday, August 20th, 2019 AT 2:34 PM
Tiny
JUNIOR16
  • MEMBER
  • 2000 PEUGEOT 406
Electrical problem
2000 Peugeot 406 6 cyl Two Wheel Drive Automatic

were is the immobilizer located and to reset it or unlock it
Was this
answer
helpful?
Yes
No
+1
Tuesday, August 20th, 2019 AT 2:35 PM (Merged)
Tiny
JUNIOR16
  • MEMBER
Was this
answer
helpful?
Yes
No
Tuesday, August 20th, 2019 AT 2:35 PM (Merged)

Please login or register to post a reply.

Related Disarm Content

Security System Reset
GUIDE
Security System Reset
Need to reset the security light in your car? If the security light is blinking the immobilizer system is enabled and will not allow the car to start.

Sponsored links