2001 Nissan Pulsar ignition problems

Tiny
DCB76
  • MEMBER
  • 2001 NISSAN PULSAR
  • 235,000 MILES
2001 Nissan pulsar n16 lx 1.6 my friend lost the key and said they could get it going again with out the key I went around two days later to find steering column in peaces and no barrel in it at all so I got secondhand ignition will all locks and keys bolted it all back into car now it will turn over and have all my dash lights are on but just wont start, fuel pump is working but because I did not pull old one out not 100% sure if all the wires and plugs are on write way I need to get car out of the place it is at can I bypassed something to get it started to move car
Tuesday, September 10th, 2013 AT 5:49 AM

5 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
There is no Pulsar in 01 for the US so I don't have any info on it but I'm betting the security system is locking you out because it doesn't recognize the key.
Was this
answer
helpful?
Yes
No
+1
Tuesday, September 10th, 2013 AT 7:39 AM
Tiny
DCB76
  • MEMBER
  • 3 POSTS
So there is easy fix then can I clear system??
Was this
answer
helpful?
Yes
No
Saturday, October 12th, 2013 AT 9:23 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
Yes, it's pretty simple. You can't change keys.
Was this
answer
helpful?
Yes
No
+2
Saturday, October 12th, 2013 AT 10:12 AM
Tiny
DCB76
  • MEMBER
  • 3 POSTS
So what can I do now the ignition barrel has been smashed and I do not have the key
Was this
answer
helpful?
Yes
No
+1
Wednesday, October 16th, 2013 AT 5:06 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
You will have to take it to the dealer so they can program new keys to a new ignition lock.
Was this
answer
helpful?
Yes
No
Wednesday, October 16th, 2013 AT 5:14 AM

Please login or register to post a reply.

Sponsored links