Engine does not crank. Fuse 107 Constantly Blowing. Replace Ignition Switch. Same Result.

Tiny
CPFULL99
  • MEMBER
  • 2001 MERCURY SABLE
  • 125,000 MILES
Have read this troubleshooting procedure:
http://www.2carpros.com/questions/ford-taurus-2000-ford-taurus-electrical-starter-issues-constantly-blowi
I need the wiring diagrams cited in the procedure above.
Thank You!
Do you
have the same problem?
Yes
No
Sunday, October 2nd, 2011 AT 8:23 PM

4 Replies

Tiny
JACOBANDNICKOLAS
  • EXPERT
Here is a schematic of the starting system. Let me know if you need something other.
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 8:39 PM
Tiny
CPFULL99
  • MEMBER
Thanks.
I also need the diagrams for:
Connector C250
Connector C270a
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 8:53 PM
Tiny
CPFULL99
  • MEMBER
And the diagram for connector C270b.
Thank You.
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 8:55 PM
Tiny
CPFULL99
  • MEMBER
Also need:
See POWER DISTRIBUTION article in WIRING DIAGRAMS.
Fig. 3: Identifying Central Junction Box Connector C270b Terminals
Location of Central Junction Box
Thank You!
Was this
answer
helpful?
Yes
No
Sunday, October 2nd, 2011 AT 9:05 PM

Please login or register to post a reply.

Recommended Guides