What does code P0136 mean

Tiny
RIEBED
  • MEMBER
  • 2001 HYUNDAI ELANTRA
  • 197,000 MILES
Hi, I have a re-occurring code that keeps coming up when my mechanic scans the car (PO136)- any idea what this could be? Both O@ sensors have been replaced as well as the flex exhaust pipe-he also says that his scanner is reading 2 codes but the PO136 is the only code that is legible to be read. Also when I remove the gas cap or get gas the CEL comes on, is it possible that the PO136 code is a faulty code? Any help would be appreciated.
Do you
have the same problem?
Yes
No
Saturday, December 24th, 2011 AT 9:18 PM

3 Replies

Tiny
ASEMASTER6371
  • EXPERT
If the voltage on the rear o2 is not between 400-500 millivolts, it will set the code. You need a better shop that can track this down for you. If you replaced it then the wiring or pcm may be at fault.

Roy
Was this
answer
helpful?
Yes
No
Saturday, December 24th, 2011 AT 9:23 PM
Tiny
RIEBED
  • MEMBER
Thanks for the reply-he plans on looking more indepth-and he did sau that the voltage was good, we will just have to see what he comes up with
Was this
answer
helpful?
Yes
No
Saturday, December 24th, 2011 AT 9:45 PM
Tiny
ASEMASTER6371
  • EXPERT
Good luck

Roy
Was this
answer
helpful?
Yes
No
Saturday, December 24th, 2011 AT 10:17 PM

Please login or register to post a reply.

Recommended Guides