where and what O ring goes bad on saturn that lets oil mix with anti freeze but not reverse on a 3.0 liter
May 21, 2011 at 11:14 PM
Advertisement
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
SATURNTECH9
AUTOMOTIVE REPAIR CONTRIBUTOR
30,869 POSTS
If you have a Ls2 saturn 3.0L its not a oring its usually a bad oil cooler that starts leaking oil into the coolant it's located under the intake manifold under the oil cooler plate.You would have to remove the oil cooler and put it in water and pressurize it with air and see if there are bubbles.I have seen a lot of them leak and do what your talking about.
May 22, 2011 at 12:41 AM
HDUARTE38
MEMBER
2 POSTS
do you have a picture
May 23, 2011 at 12:17 AM
Advertisement
SATURNTECH9
AUTOMOTIVE REPAIR CONTRIBUTOR
30,869 POSTS
There you go if you look under the intake manifold with a flash light you will see it.