2000 LS2 Serpentine belt change

Tiny
ANTHONY WILLIAMS
  • MEMBER
  • 2000 SATURN
  • 6 CYL
  • 2WD
  • AUTOMATIC
Have a 2000 saturn ls2 v6 3.0. I need to change the serpentine belt. Do I have to remove the motor mount on the front to get the belt on?
Do you
have the same problem?
Yes
No
Friday, June 24th, 2011 AT 3:15 PM

5 Replies

Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
Will look it up and post
Was this
answer
helpful?
Yes
No
+1
Friday, June 24th, 2011 AT 3:21 PM
Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
Www.2carpros. Com/diagrams/saturn/sl2/2000
go here to look I don't think so.
Was this
answer
helpful?
Yes
No
+3
Friday, June 24th, 2011 AT 3:28 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Just to add to this one I always put a floor jack under the oil pan with a block of wood to support the engine and I remove the upper mount and air box and jack the engine up and that gives you plenty of room to change the belt.
Was this
answer
helpful?
Yes
No
+1
Saturday, June 25th, 2011 AT 2:07 AM
Tiny
MERLIN2021
  • MECHANIC
  • 17,250 POSTS
Thanks saturntech9, all help is appreciated
Was this
answer
helpful?
Yes
No
Saturday, June 25th, 2011 AT 6:23 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Your welcome also there is a bracket that bolts to the engine that mount bolts to removing that gives you plrnty of room to get in there.
Was this
answer
helpful?
Yes
No
+1
Saturday, June 25th, 2011 AT 8:20 PM

Please login or register to post a reply.

Sponsored links