BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I changed the intake manifold on my Jeep and now.
2000 JEEP CHEROKEE
I changed the intake manifold on my Jeep and now when I crank it up it red lines and hit the rev limiter. What is the cause
Thursday, February 28th, 2013 AT 7:49 PM
Check for a vacuum leak at manifold with choke cleaner, either a gasket slipped or it is not tight enough. They shold have about 25 ft lbs torquw e if 13mm nuts/bolts
Thursday, February 28th, 2013 AT 8:20 PM
to post a reply.
Related Intake Manifold Replace/Remove Content
1990 Jeep Cherokee Intake
Engine Mechanical Problem 1990 Jeep Cherokee 6 Cyl Two Wheel Drive Automatic 90000 Miles How Do You Remove Intake
Getting Oil Cap Off
My Daughter Needs To Add Oil To Her Car, But Can't Get The Cap Off As It Seems To Be Almost Vacuumed Sealed, She Has Asked 2 Guys To Help...
2000 Jeep Cherokee
Shakes Or Wobbles Problem 2000 Jeep Cherokee 4 Cyl Four Wheel Drive Automatic How May O2 Sensors Does A 2000 Jeep Grand Cherokee...
I Recently Had A New Head Gasket Put On Myvehice But While Doing So My Mechanic Noticed A Block In My Motor Causing Oil And Coolant To Mix....
2000 Jeep Cherokee Contanstly Reading Low Voltage On...
Electrical Problem 2000 Jeep Cherokee 6 Cyl Four Wheel Drive Automatic 108000 Miles Replaced Engine Recently. The Jeep Is Running...
Ask a Car Question. It's Free!
Vacuum Leak Test and Repair - All Cars
Coolant Leak Symptoms
Coolant Leak Repair
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.