Firing order needed

Tiny
VICKICOX2001
  • MEMBER
  • 2000 FORD EXPLORER
  • V8
  • 2WD
  • AUTOMATIC
I have the vehicle listed above with a 5.0L engine. I changed my spark plugs and cables now the SUV shakes when I start it. Could you please give me a diagram of the firing order? Thank you so very much.
Do you
have the same problem?
Yes
No
Tuesday, June 14th, 2011 AT 3:47 PM

4 Replies

Tiny
DOCFIXIT
  • EXPERT
Hello,

Here is the firing order for you engine. Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.

Cheers
Was this
answer
helpful?
Yes
No
+5
Tuesday, June 14th, 2011 AT 4:05 PM
Tiny
DLOBI
  • MEMBER
Starting on the passenger side from grill towards firewall is 1 2 3 4.
Drivers side grill to firewall is 5 6 7 8.
If you need to know coil pack wire position, I need to know if it is a 4.6 or 5.0 liter.
Was this
answer
helpful?
Yes
No
Monday, June 11th, 2018 AT 2:56 PM (Merged)
Tiny
BRANDON GREER
  • MEMBER
  • 1999 FORD EXPLORER
  • 4.0L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 137,400 MILES
What is the firing order?
Was this
answer
helpful?
Yes
No
Monday, June 11th, 2018 AT 2:56 PM (Merged)
Tiny
HMAC300
  • EXPERT
The firing order is in a manual and sometimes cast on intake if cast aluminum. But if plastic I will send it in picture. There are two different VIN numbers for plug wire placement. See pictures.
Was this
answer
helpful?
Yes
No
Monday, June 11th, 2018 AT 2:56 PM (Merged)

Please login or register to post a reply.

Recommended Guides