1999 Mitsubishi Eclipse no power to OBD 2 port

Tiny
CHEPO00
  • MEMBER
  • 1999 MITSUBISHI ECLIPSE
  • 155,000 MILES
My 1999 eclipse has no power try to get a code and nothing. Took it to Autozone and Oreilly and no luck. Check all my fuses and are good my cigarette lighter work, interior light work and car runs good, so I don't think ECU is bad. Seen other post from Eclipse owners with same problem and found no serious answers. Any ideas?
Do you
have the same problem?
Yes
No
Tuesday, October 22nd, 2013 AT 7:31 AM

3 Replies

Tiny
HMAC300
  • EXPERT
Check fuel pressure with a gauge, auto parts rent them
Was this
answer
helpful?
Yes
No
-1
Tuesday, October 22nd, 2013 AT 9:42 AM
Tiny
CHEPO00
  • MEMBER
We all do respect, I don't know everything but I don't think fuel pressure have nothing to do with having no power on the OBD II port where you connect the reader to get the car's computer codes.
Was this
answer
helpful?
Yes
No
Tuesday, October 22nd, 2013 AT 9:53 AM
Tiny
HMAC300
  • EXPERT
I misread it check fuse 11 underhood fuse box if not that then you'll have to see if it's a bad connection at ecm and aldl but check fuel pressure anyhow it may be low.
Was this
answer
helpful?
Yes
No
Tuesday, October 22nd, 2013 AT 10:18 AM

Please login or register to post a reply.

Recommended Guides