(2) All bolts except No. 9 (8-mm bolt) must be tightened to specification in sequence. See Fig. 6. No. 9 bolt should be tightened to 25 ft. Lbs. (34 N.M) after all other bolts are tightened to specification
June, 9, 2012 AT 3:31 PM
Torque sequences are always the same. Start in the middle and work toward the ends while alternating sides.
June, 9, 2012 AT 9:59 PM
Thank you rasmataz I'm going to take the heads to a machine shop to have them checked for warping and look for cracks. Anything else should I be looking for? I've never done this before but I'm not scared.
June, 9, 2012 AT 10:10 PM
Your on the right direction-go do it and let us know what's going on-