1999 Chevrolet S-10 oxygen sensor fault

Tiny
HANKSTER66
  • MEMBER
  • 1999 CHEVROLET S-10
  • 4.3L
  • V6
  • 2WD
  • AUTOMATIC
  • 160,000 MILES
Truck started chugging especially when cold and engine light came on. Hooked up my scanner and found 02 sensor code. Purchased the part today but am unsure how to determine which sensor to change as I understand there are more than 1.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Saturday, March 15th, 2014 AT 9:00 PM

3 Replies

Tiny
KNOWLEDGE IS POWER
  • EXPERT
Bank one is on the driver side exhaust, bank two is on the passenger side exhaust. Sensor one is ahead of the catalytic converter and sensor two is behind it toward the rear of the vehicle for both sides. So a bank one sensor one is the first one back from the motor on the drivers side
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, March 16th, 2014 AT 7:28 AM
Tiny
HANKSTER66
  • MEMBER
Mission accomplished, truck runs great, Thanks a lo for the help
Was this
answer
helpful?
Yes
No
-1
Sunday, March 16th, 2014 AT 3:57 PM
Tiny
KNOWLEDGE IS POWER
  • EXPERT
Thank you for the compliment you made my day. And you are very welcome, I'm glad it worked
Was this
answer
helpful?
Yes
No
Sunday, March 16th, 2014 AT 3:59 PM

Please login or register to post a reply.

Related Oxygen Sensor Replace/Remove Content

Oxygen Sensor Replacement
VIDEO
Oxygen Sensor Replacement
Instructional repair video
Oxygen Sensor Replacement
GUIDE
Oxygen Sensor Replacement
An oxygen or lambda sensor is used to determine the engine exhaust mixture which can then be controlled by the computer. These sensors are equipped with a heater that can...
VIEW MORE

Sponsored links