WE CHANGED THE CLUTCH AND MASTER SLAY CYLINDER ...

  • Tiny
  • Bbarbo9
  • 1998 SATURN SC2
  • 230 MILES

We changed the clutch and master, slay cylinder and everything turned the car over ran. Forgot to put axle in and car shifted like butter now I put axle on and car wont shift. Help

Do you
have the same problem?
Yes
No
Sunday, May 20th, 2012 AT 9:14 PM

23 Replies

  • Tiny
  • Bbarbo9
  • MEMBER

It shifted like butter then put axle back in then it wouldnt shift. Help

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 9:16 PM
  • Tiny
  • Rasmataz
  • MEMBER

Drive axle might not be fully seating-recheck

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 9:22 PM
  • Tiny
  • Bbarbo9
  • MEMBER

Pulled it out and it was loose and it shifts now so what do I need to do

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 9:43 PM
  • Tiny
  • Bbarbo9
  • MEMBER

The left side clicked in. So do I check right side? Will transmissonn fl run out that side I heard it only does it on driver side

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 9:45 PM
  • Tiny
  • Rasmataz
  • MEMBER

Jack the front up and see if the driveaxle will turn while in gear

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 9:48 PM
  • Tiny
  • Bbarbo9
  • MEMBER

There is no grease at ALL in there. Would that have anything to do with it

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 10:03 PM
  • Tiny
  • Bbarbo9
  • MEMBER

I jacked it up and now it changes

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 10:16 PM
  • Tiny
  • Rasmataz
  • MEMBER

What do you mean no grease -where? Does it have transaxle fluid?

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 10:57 PM
  • Tiny
  • Bbarbo9
  • MEMBER

The grease or oil whatever fir the front axle and yes

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 10:58 PM
  • Tiny
  • Rasmataz
  • MEMBER

When you jacked it up is the driveaxle turning-if not you need to redo everything again and investigate closely

Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 11:02 PM

Please login or register to post a reply.

Other Transmission Clutch Master Primary Cylinder Replace/Remove Questions