Timing

STEVEO121985

MEMBER
1998 RENAULT MEGANE
85,000 MILES

Hi got a renault megane 1.6 petrol was running car till the timingbelt was changed, the right timing tools were used and the timing marks are spot on BUT the engine has lost all compression on all cylinders have done a code read but no codes pressent this has really stressed me out as I cant pin point the problem the engine turns over fine just doent try to fire got spark and fuel but why no compression?

Monday, September 12th, 2011 AT 9:27 PM

1 Reply

MHPAUTOS

MECHANIC
31,937 POSTS

I do feel that the timing is not correct and you may have bent valves, do a wet compression check, that is add a small amount of engine oil to the cylinder just enough to seal the rings, and re check the comps, if there is no improvement in the readings the valves will be the problem, do this one at a time and advise me of the readings.

Was this

answer

helpful?

Yes

No

Monday, September 12th, 2011 AT 10:46 PM