A/C BELT

  • Tiny
  • dstuart6168
  • 1998 Plymouth Voyager
  • 6 CYL
  • FWD
  • automatic
  • 293,000 miles

Is there a tension adjustment on a 1998 Plymouth Voyager 3.0 a/c belt?


Do you
have the same problem?
Yes
No
Sunday, July 24th, 2011 AT 8:48 PM

3 Replies

  • Tiny
  • caradiodoc
  • Expert
  • 25,441 posts

A spring-loaded one for the serpentine belt and an adjustment bolt for the AC belt.

Was this
answer
helpful?
Yes
No
Sunday, July 24th, 2011 AT 9:00 PM
  • Tiny
  • dstuart6168
  • Member

Where is the adjustment bolt located?

Was this
answer
helpful?
Yes
No
+1
Monday, July 25th, 2011 AT 9:41 PM
  • Tiny
  • caradiodoc
  • Expert
  • 25,441 posts

The bolt for the AC belt sticks up in front of the idler pulley. Turn it counterclockwise about ten turns. Next, loosen the lock nut at the center of that pulley and it will slide down about a half inch. That's enough to pull the belt off. When you reinstall it, tighten the bolt to draw the pulley up, then tighten the lock nut.

Was this
answer
helpful?
Yes
No
+2
Tuesday, July 26th, 2011 AT 2:13 AM

Please login or register to post a reply.

Similar Questions