1998 GMC Yukon valve cover

Tiny
JETJUT
  • MEMBER
  • 1998 GMC YUKON
  • 288,000 MILES
Im trying to change the valve covers on my yukon and I am having trouble getting the driver side cover out, I already got the passenger out and replaced, I think the driver side. The problem holding it I think is that the compresser is in the way do I need to take that off or is there a trick or other way of getting it out.
Do you
have the same problem?
Yes
No
Monday, June 24th, 2013 AT 12:50 PM

5 Replies

Tiny
DOCFIXIT
  • EXPERT
No trick AC copm must be removed and moved out of way
Was this
answer
helpful?
Yes
No
Monday, June 24th, 2013 AT 1:38 PM
Tiny
JETJUT
  • MEMBER
Thank you and I did that and the piece under that is still in the way of the gasket coming out
Was this
answer
helpful?
Yes
No
Monday, June 24th, 2013 AT 1:45 PM
Tiny
DOCFIXIT
  • EXPERT
Meaqn the bracket? What engine?
Was this
answer
helpful?
Yes
No
Monday, June 24th, 2013 AT 1:53 PM
Tiny
JETJUT
  • MEMBER
Yes and its a 5.7L 350
Was this
answer
helpful?
Yes
No
Monday, June 24th, 2013 AT 1:59 PM
Tiny
DOCFIXIT
  • EXPERT
Mitchell does not state bracket needs removal but that does not mean it doesn't. Does valve cover lift up but hits bracket and does not clear valve spring? If yes then bracket must come off
Was this
answer
helpful?
Yes
No
Tuesday, June 25th, 2013 AT 8:45 AM

Please login or register to post a reply.

Recommended Guides