ASK A QUESTION
BECOME A MEMBER
Login with Facebook
NOT A MEMBER?
TERMS AND CONDITIONS
Install Problem for distributor rotor and gear
1998 GMC SIERRA
How do I reinstall a distributor rotor and gear on my 98 GMC Sierra 1500
I took the whole distributor out of the Engine.
Please help me.
have the same problem?
Wednesday, November 16th, 2011 AT 2:03 AM
Put the engine no.1 piston on its compression stroke/TDC and line markings at crank pulley to 0/TDC than install distributor making sure the rotor is pointing directly under the no.1 cap tower-
Wednesday, November 16th, 2011 AT 2:20 AM
Thank you so much
You've been a great help. Thanks
Monday, November 21st, 2011 AT 9:05 PM
You're very welcomed
Monday, November 21st, 2011 AT 9:24 PM
Ckp128, did you get the truck to go vroom vroom again?
Monday, February 13th, 2012 AT 11:03 PM
to post a reply.
Related Ignition Distributor Rotor Content
1994 Gmc Sierra Control Module In Distributor
Truck Would Not Run. Ase Mech. Put New Distributor Module In, Ran For 4 Miles And Quit Again. He Gave Up. I Replaced Distributor Control...
How Do I Set The Ignition Timing When I Reinstalled...
I Had My Distributor Out And I Need To Reset My Timing On A 1996 Gmc 1500 350 R Engine Code To Proper Spect.
1989 Gmc Sierra Distributor
I Have A 1989 Gmc Sierra With A 350 Hei. The Engine Was Rebuilt And Is Leaking Oil From The Distributor. I Know That I Need To Replace The...
1996 Gmc Sierra Mositure At Distributer
Electrical Problem 1996 Gmc Sierra V8 Four Wheel Drive Automatic Every Time It Rains I Have Trouble With Mositure At The Distributor...
Wiring Diagram For Firing Order
I Just Changed The Cap, Rotor, Plugs And Wires And Can't Get It To Fire, I'm Looking For The Diagram For The Firing Order?
Ask a Car Question. It's Free!
Spark Plug Replacement Mercedes Benz
Ignition Coil Replacement
Online car repair manuals
Terms & Conditions
© 1999 - 2023 2CarPros, Inc.