I HAVE A 3

  • Tiny
  • BCous1
  • 1998 Dodge Intrepid
  • 76,000 miles

I have a 3.2L and it cranks but wont turn over. Ive changed the crank and cam sensor, there's a brand new battery that Ive tested to make sure was good and this puppy wont start. I get clicking noise from the relays. I switched them around and they're good. Then disconnected the terminals to the PCM and the clicking noise from the relays stopped. Plugged the PCM trrminals back in and the clicking started back up. Is that a bad PCM?

Thursday, April 4th, 2013 AT 10:23 AM

3 Answers

  • Tiny
  • ASEMaster6371
  • Expert
  • 25,551 posts

No, it is energizing relay for operations.

Start with basics, fuel pressure, spark and compression

Roy

Was this
answer
helpful?
Yes
No
Thursday, April 4th, 2013 AT 10:27 AM
  • Tiny
  • BCous1
  • Member

Thanks Roy for your response. It has low compression and no spark.

Was this
answer
helpful?
Yes
No
Thursday, April 4th, 2013 AT 10:43 AM
  • Tiny
  • BCous1
  • Member

Thanks Roy for your response. But it has low compression and no spark.

Was this
answer
helpful?
Yes
No
Friday, April 5th, 2013 AT 10:59 AM

Please login or register to post a reply.

Similar Questions