BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I replaced my spindle now the hub is shaking why is that?
1998 DODGE DURANGO
When I take tire off the hub is shaking back and forth and when I drive its like there is a scraping noise i'm not sure why
have the same problem?
Friday, October 12th, 2012 AT 7:55 PM
Check the spindle central nut. It is most likely not torqued correctly.
Friday, October 12th, 2012 AT 8:06 PM
I checked everything there all tight
Friday, October 12th, 2012 AT 8:22 PM
If the hub is shaky, something must be loose or there is a misfit.
Friday, October 12th, 2012 AT 8:49 PM
to post a reply.
Related Spindle Replace/Remove Content
So My Durango Started Wobbling, It Only Happens When...
So My Durango Started Wobbling, It Only Happens When I Stop Or Make A Turn It Usually Only Lasts For Like 5 Min If I Drive Slowly And Then...
1999 Dodge Durango Torsion Bar
Suspension Problem 1999 Dodge Durango V8 Four Wheel Drive Automatic How Do I Remove The Torsion Bar From The A Arm. I Am Replacing...
I Wrecked The Other Day. It Turned Sideways And The...
I Wrecked The Other Day. It Turned Sideways And The Back Driver Side Hit Against The Guard Rail. It Flatened The Back 5ire And Broke The...
1999 Dodge Durango Loud Noise And Vibration
Noises Problem 1999 Dodge Durango V8 Four Wheel Drive Automatic 100000 Miles Im Getting Noise And Vibration From Front End, I Took It...
2002 Dodge Durango Can't Isolate Suspension Issue
Suspension Problem 2002 Dodge Durango V8 Two Wheel Drive Automatic 110000 Miles Originally I Noticed Something Was Wrong The First...
Ask a Car Question. It's Free!
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.