1998 Dodge Caravan WATER PUMP

Tiny
BRIANA23
  • MEMBER
  • 1998 DODGE CARAVAN
  • 3.3L
  • V6
  • AUTOMATIC
  • 218,000 MILES
Need to replace water. Do I have to drop the engine? Or do any major moving of pibarts? I've watched a lot of YouTube videos on how to do it but some say u drop engine others. Don't..
.

.
.
.
Do you
have the same problem?
Yes
No
Sunday, December 1st, 2013 AT 7:43 AM

1 Reply

Tiny
HMAC300
  • EXPERT
Drain cooling system. Remove drive belt. Remove right front lower fender shield. Remove water pump pulley. Remove bolts, water pump and "O" ring.
To install, reverse removal procedure. Use NEW "O" ring. Tighten bolts to specification. See TORQUE SPECIFICATIONS. Fill cooling system.
Timing Chain Cover Bolt
8-mm Bolt20 (27)
10-mm Bolt40 (54
Water Pump Pulley Bolt21 (29
torques first figure foot pds second Nm
Was this
answer
helpful?
Yes
No
Sunday, December 1st, 2013 AT 8:18 AM

Please login or register to post a reply.

Recommended Guides